پاور آنالایزر سه فاز هارمونیک آنالایزر POWER/HARMONIC ANALYZER DW-6095

          تجهیزات اندازه گیری و ابزار دقیق فراسل 
            بازدید : 34
          چهارشنبه 28 مرداد 1394
           نظرات (0)
        

قابلیت اندازه گیری هارمونیک توسط پاور آنالایزر مدل DW-6095 با قابلیت دیتالاگر

دارای کارت حافظه جانبی

قابلیت اندازه گیری پارامتر های :

جریان True RMS از ۲۰ آمپر الی ۱۲۰۰آمپرAC

ولتاژ True RMS از ۱۰ الی ۶۰۰ ولت AC

زاویه فاز از -۱۸۰ الی +۱۸۰ درجه

فرکانس از ۴۵ الی ۶۵ هرتز HZ

V “phase-to-phase”

V phase-to-ground”

A “phase-to-ground”

قابلیت اندازه گیری فرکانس

قابلیت اندازه گیری ضریب توان PF

قابلیت نمایش هارمونیک روی صفحه دستگاه

بت مقادیر همراه با سال-ماه-روز-ساعت -دقیقه-ثانیه

قابلیت دیتالاگر”ثبت مقادیر اندازه گیری شده” روی کارت حافظه جانبی تا ۱۶ گیگا بایت

قابلیت اتصال به کامپیوتر توسط کابل RS232 , usb ونرم افزار مربوطه جهت رسم گراف و گزارشات خروجی از دستگاه

LUTRON DW-6095

۳ Phase Power Analyser Lutron DW-6095 brings basic power analysis, and fault finding within the grasp of most technicians. Included is a complete, ready to use kit for measuring all power parameters on industrial installations to 1200A, with extension using clamp CP3000 to 3000A.

Power quality problems can cost manufacturing businesses big money and power can be lost through changes in power factor on different boards in your plant or different phases in a board. Facilities can also suffer from very high tariff rates being applied based on short term peak loading. Before determining the best action plan for your operations to minimise this, find out what is happening in your plant power system.

The Lutron DW-6095 provides the most functionality of all the simple power analysers with up to 35 parameters to 600VAC and 1,200A or 3,000A with optional flexible current probes. It includes harmonics to 50th order and captures transient events as dips, swells and outage. Data can be logged at intervals from 2 to 7200 seconds with 30,000 readings on a 2GB SD card for ready analysis in a spread sheet format.

The unit comes as a complete kit with 3 current and 4 voltage probes in a carry bag ready for use. Flexible current probes (CP-3000) for 30, 300, and 3000A are also available as an optional extra for the DW-6095 and connect directly without separate power supply.

The information gained through a plant-wide review with this instrument can guide you in planning steps to reduce your power consumption, and certainly your power bills in future.

Features

Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W
۳ current probes (CP-1201) are included, if change the current probes, the calibration procedures are not necessary
Current probe input signal/ranges with selection:

Input Signal (ACV)

۲۰۰mV / 300mV / 500mV / 1V / 2V / 3V

Ranges (ACA)

۲۰A / 200A / 2000A / 30A / 300A / 3000A

Meter can cooperate the universal current probes
Complete set with 4 PCs Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe (CP-1201), AC to DC 9V Adapter, 2GB SD Memory card and Carrying bag
Measurement:

V (phase-to-phase)

V (phase-to-ground)

A (phase-to-ground)

KW / KVA / KVAR / PF (phase)

KW / KVA / KVAR / PF (system)

KWH / KVAH / KVARH / PFH (system)

Phase Angle

Harmonics display (1-50th order)
Simultaneous display of Harmonics and Waveform
Display of Waveform with Peak Values
Analysis of Total Harmonic Distortiion (THD)
Graphic Phase diagram with 3-Phase system parameters
۳ Phase Voltage or Current Unbalanced Ratio (VUR, VIR) and Unbalanced Factor
Calculated Unbalanced Current through Neutral Line (In)
Capture Transient events (including Dip, Swell and Outage) with programmable threshold (%)
Programmable CT ratio (1 to 600) and PT ratio (1 to 1000)
ACV input impedance is 10M ohms
Safety Standard: IEC 1010, CAT III 600V
Built-in clock and Calendar, real time data record with SD memory card, sampling time set from 2 to 7200 senconds. Just slot in the SD card into the computer, it can download all the measured valued with the time information (year, month, date, hour, minute, second) to the Excel directly, then user can make the further data analysis by themselves
Powered by AA (UM-3) DC 1.5V x 8 batteries (Alkaline type) of DC 9V adapter
Computer data output, can cooperate with optional USB cable (USB-01), RS-232 cable (UPCB-02) and Data Acquisition software (SW-811)
Optional current probes: CP-1201, CP-2000, CP-200, CP-3000
User can order the meter only (without the current probes) with the special request as intend to cooperate their own current probe
Patented